Loading... Please wait...

Haltech Sprint RE Flying Lead Kit

  • Image 1
$1,050.00 (inc GST) $954.55 (exc GST)
3.00 KGS
Calculated at checkout

Product Description



The Platinum Sprint RE

Engine Suitability:

• 2 Rotor Engines - 2nd Generation RX7 (FC3S)/Turbo II, 3rd Generation RX7 (FD3S) and RX8 (SE3P)

• Normally Aspirated or forced induction

• Load sensing by throttle position or manifold pressure (MAP)

• Sequential Injection

• Distributor ignition systems or multi-coil systems

Trigger Types:

• Reluctor

Trigger Patterns:

• Mazda Rotary Mult-itooth 24 and 2

• Mazda Rotary RX8


• Windows 2000, XP, Vista, Windows 7 compatible software

• Real time programming, instant hesitation free adjustment while engine is running

• Fully user definable 16 x 16 mapping

• Tuning via Injection time

• Supports staged fueling

• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)

• USB and CAN Communication Port

• Custom sensor calibaration allows for most factory sensors to be used

• 2 x User programmable outputs

ECU Fixed Outputs:

• 4 x Fuel Injector outputs

(for high impedance injectors only (ie: above 8O)

• 4 x Ignition outputs

• Tacho

• Thermo Fan

• Fuel Pump

ECU Programmable Outputs:

• 2 x Programmable Outputs

ECU Inputs:

• Air Temperature

• Aux Rev Limiter

• Coolant Temperature

• Manifold Absoloute Pressure

• Roadspeed

• Throttle Position

• O2 Sensor (Narrowband or Wideband)


• CAN Communication

• O2 Control

• Over Boost

• Gear Setup

• Decel Cut

• Transient Throttle Enhance

• Rev Limiter

Correction Tables: Fuel / Ignition:

• Air Temp Correction

• Barometric Correction

• Coolant Temperature Correction

• Injector Dead Time

• Map Correction

• Post Start

• Prime Pulse

• Staging Bar Injection Time

• Throttle

• Zero Throttle


• Tune can be password protected in software

• Small and compact design

• Rugged anodized aluminum casing

Power Requirements:

Source: 8.6 to 16.5 Volts DC

Consumption: 360mA @ 12Volts DC

Physical Dimensions:

ECU Dimensions Length: 134mm (154mm with MAP nipple)

Width: 64mm Height: 28mm Weight: 195g (0.43 lb)

The Platinum Sprint RE kit includes:
ECU Programmable Computer, Flying Loom, USB Programming Cable, Instruction Manual (on CD),Programming software, Quick Start Guide, Haltech Sticker


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...