|
|
|
Current Category Nitrous Oxide Kits
 |
This category is NOS Nitrous Oxide products, "Bolt on Boost". We carry the full range of NOS gear from the Sneeky Pete units to the fogger injection units capable of up to 225 extra horsepower from a bottle! We have a sample range on offer on our site, so if don't see the model or part you want email us with your requirements. |

|
NOS Bottle Heater 10 and 15lb bottles
Nitrous pressure should be kept consistent to obtain optimum performance. All NOS systems are designed to work best with a bottle pressure of 900-950 PSI. Pressure is determined by the amount of nitrous contained in the bottle and temperature. The chart below shows what happens to nitrous at various temperatures. Accordingly, it's a good idea to use an NOS bottle heater and/or blanket. Likewise, maintaining consistent line filling is important...which is why most racers use an NOS purge valve to release nitrous vapor from the feed line. This provides liquid nitrous to the inlet of the solenoid(s) for better consistency and repeatability.
Bottle Heaters NOS systems are calibrated for optimum performance with a bottle pressure of 900-950 psi. The pressure will change with temperature (see chart below). Heater kits are thermostatically controlled to keep the bottle near 85°F to provide correct pressure. Kits available for the most popular-sized bottles, with both 12-volt and 110-volt heaters offered.
|
|
Price:
|
|

|
NOS Bottle Blanket 10lb bottle
Nitrous pressure should be kept consistent to obtain optimum performance. All NOS systems are designed to work best with a bottle pressure of 900-950 PSI. Pressure is determined by the amount of nitrous contained in the bottle and temperature. The chart below shows what happens to nitrous at various temperatures. Accordingly, it's a good idea to use an NOS bottle heater and/or blanket. Likewise, maintaining consistent line filling is important...which is why most racers use an NOS purge valve to release nitrous vapor from the feed line. This provides liquid nitrous to the inlet of the solenoid(s) for better consistency and repeatability.
Bottle Blankets Insulating the bottle helps maintain pressure by keeping heat in the bottle when it's cold, or heat out when it's hot outside. The blankets are made of a rugged, easily cleaned nylon outer shell with insulation. It's also an excellent "dress up" accessory - and perfect for "covering" battle-scarred bottles.
|
|
Price:
|
|

|
NOS Bottle Blanket 15lb bottle
Nitrous pressure should be kept consistent to obtain optimum performance. All NOS systems are designed to work best with a bottle pressure of 900-950 PSI. Pressure is determined by the amount of nitrous contained in the bottle and temperature. The chart below shows what happens to nitrous at various temperatures. Accordingly, it's a good idea to use an NOS bottle heater and/or blanket. Likewise, maintaining consistent line filling is important...which is why most racers use an NOS purge valve to release nitrous vapor from the feed line. This provides liquid nitrous to the inlet of the solenoid(s) for better consistency and repeatability.
Bottle Blankets Insulating the bottle helps maintain pressure by keeping heat in the bottle when it's cold, or heat out when it's hot outside. The blankets are made of a rugged, easily cleaned nylon outer shell with insulation. It's also an excellent "dress up" accessory - and perfect for "covering" battle-scarred bottles.
|
|
Price:
|
|

|
NOS Time Based Progressive Controller
Time-Based Progressive Nitrous Control System The NOS Time-Based Progressive Nitrous Control starts nitrous flow at any level you set (from 0% to 100%) and then gradually brings in the full 100% flow of nitrous over a time period adjustable from 0 to 10 seconds. This allows you to start with a small shot of nitrous power (say 25 to 30%) to minimize wheel spin off the line; then smoothly transition to full nitrous power when the tires can hook up and handle it. ET improvements of up to 1/2 second and more can be achieved with the simple addition of an NOS Progressive Controller. May be used with most single stage nitrous systems. It features a black anodized, billet aluminum case and unique adjustment knobs that lock into place, so the progressive settings can not accidentally be changed.
|
|
Price:
|
|

|
NOS Merchandise - Flame Hat
NOS has a large range of Merchandise such as T-Shirts and Hats, such as this great looking Flame Hat.
|
|
Price:
|
|
Previous Page 1 [2]
|
|