Home | How to Shop | Contact Us | Links | Special Orders | Policies

   

 
   
 
 
 



We are a dealer for 6Boost Manifolds, so where specified the item is a 6boost unit.

All 6Boost turbo manifolds are designed around a unique “Merge collector”. This type of collector technology has been used in the highest forms or motor sport for years, but never applied commercially to turbo manifolds anywhere in the world. The design of the merge collector is such that all gases are directed at the turbine entry; no pipes enter across each other, disrupting airflow. The distinct look and design of the collector is easily recognisable, with the pipes entering in a circle and forming a “point” or “spire”.

 

With this collector technology we have seen anywhere from 200-400rpm faster spool and gains in the region of 6-15% in power in back to back dyno testing, even on highly tuned race engines. Every single engine that has been back to back tested to date has made more power and spooled faster. All manifolds are constructed from thick wall mandrel bent steam pipe and are designed and built in st1:country-region w:st="on">Australia to be of the highest quality manifolds available. All manifolds are heavily sandblasted inside and out and coated in high temp exhaust enamel that has proven to stand the excessive heat of a turbocharged environment. They also come with studs and nuts for your cylinder head and turbo flanges, and are faced and hand ported, ready to be used.

 

All 6boost manifolds are mild steel construction and come with a lifetime warrantee against cracking and defects, an Australian first in turbo manifold manufacture.

 

Manifolds available for:

 

Nissan: RB20, RB25, RB26, RB30, SR20 (High & Low Mount), 4AGE, 4A 20v, CA18, FJ20
Mitsubishi: 4G63 Lancer , Evo 1-3, Evo 4-9
Toyota: 1JZ-GTE, 2JZ-GTE, 1GGTE
Ford: EA-AU Falcon, BA Falcon
Mazda: 13B` coming soon.

 

And to suit all flange patterns and turbo fitments from T2 up to TA51. Others available on custom order.

 




6boost Merged Collector Steel manifold suit GT25,28 on Nissan 4cyl Low Mount
6boost Merged Collector Steel manifold suit GT25,28 on Nissan 4cyl Low Mount
These manifolds are available to suit CA and SR series motors, others can be custom made on request ... just E-mail us.

Made of thick wall mild steel steam pipe, they are mandrel bends and offer excellent flow over standard units. Can only be supplied as low mount with or without external wastegate pipe. Thick, machined and heat treated flanges ensure good sealing and no warping or cracking, with the famous 6boost Merged Collector and a lifetime warranty **conditions apply** 

 


OUR Price:









QTY:
Select a Model


        
6boost Merged Collector Steel manifold suit GT30 HIGH MOUNT on SR20 & CA18 4Cyl
6boost Merged Collector Steel manifold suit GT30 HIGH MOUNT on SR20 & CA18 4Cyl
These manifolds are available to suit CA and SR series motors, others can be custom made on request ... Just Email Us.

Made of thick wall mild steel steam pipe with mandrel bends, offering excellent flow over standard units. These units are High Mount design with or without external wastegate pipe. Our 6boost manifold comes with thick laser cut head and base flanges, and short  larger diameter runners, and a large plenum area before the base flange. The manifold comes with the T3 flange. The T2528 flange can be supplied as a custom order. Usually allow two weeks delivery for a custom unit.

 

***The picture is a sample of the 6boost manifolds.. the pic is a low mount version***


OUR Price:









QTY:
Select a Model


        
6boost Merged Collector Steel manifold suit GT30 etc 6cyl
6boost Merged Collector Steel manifold suit GT30 etc 6cyl

Made of thick wall mild steel steam pipe, they are mandrel bends and offer excellent flow over standard units. Can only be supplied as low mount with or without external wastegate pipe. Thick, machined and heat treated flanges ensure good sealing and no warping or cracking, with the famous 6boost Merged Collector and a lifetime warranty **conditions apply** 

Cat 1 freight per unit.


OUR Price:









QTY:
select a model


        
WRX Xforce Exhaust Manifold in stainless steel
WRX Xforce Exhaust Manifold in stainless steel

X Force Stainless Steel Turbo Manifold is made of T304 grade stainless steel. 2~2.5mm wall thickness and neat TIG welding seam ensure solid and durable performance. Equal pipe length design.Proven power gain.

This unit is great value for money and makes a neat bolt on in both perfromance and looks for your WRX.


OUR Price:









QTY:

        
Mazda RX7 GT35/40 kit Complete minus Turbo suit FD RX7
Mazda RX7 GT35/40 kit Complete minus Turbo suit FD RX7

This kit comes complete with Stainless steel downpipe with Plumbed back in wastegate  featuring flex pipe to stop cracking. 45mm Turbosmart Pro-Gate. Oil feed (braides stainless) and drain lines (stainless) and water fittings which use aluminium A/N fittings . Turbo to suit can be found in our turbochargers section or E-mail us for a package deal on the whole lot.

 


OUR Price:









QTY:

        
Adapter for GT20,25,28 to fit T3 style manifold
Adapter for GT20,25,28 to fit T3 style manifold

This unit is a two plate adapter that bolts to a T3 manifold flange and adapts for the T25 flange turbo. The unit is lasercut plates with a CNC machined taper for a uniform transition to the smaller inlet size.

Cat 1 freight per unit.


OUR Price:









QTY:

        

 
 

 

 
 
 
 
 
   

Home | How to Shop | Contact Us | Links | Special Orders | Policies
Copyright 2010 HME Australia Pty Ltd All Rights Reserved. Theme by Practical-Webs