|
|
|
|
|
 |
|
|
SARD Fuel Pressure Adapter for 4G63
This Adapter allows a straight bolt on instal for the SARD Fuel Regulator, making a very neat deal for one of the best rising regulators on the market.
|
OUR Price:
|
|
|
Holley 600Hp Electric Fuel Pump
These Holley universal, in-line fuel pumps are intended for fuel injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They're all rated for continuous duty service and have been tested up to 2500 hours. The high output versions are great for serious performance work. These pumps should be mounted below the fuel level of the tank for a good gravity feed on the inlet side.
|
OUR Price:
|
|
 |
|
Holley Throttle Body 80mm
Does your engine seem like it's out of breath? You can increase engine breathing with a Holley high-air-flow throttle body! Fully CNC machined from 6061 billet aluminum, these new Holley throttle bodies are designed to use the stock TPS and IAC to simplify installation. Some throttle bodies are even anodized clear, blue or red for good looks. They also include all the necessary vacuum ports and linkage to facilitate installation. Don't get left in the dust. New Holley high-flow throttle bodies are the ticket to ride.
NOTE: Some manifold machining may be required to correctly port-match the throttle body to the intake.
|
OUR Price:
|
|
|
|
|
Holley Throttle Body 95mm Ford Style - Great for Jap Cars
Does your engine seem like it's out of breath? You can increase engine breathing with a Holley high-air-flow throttle body! Fully CNC machined from 6061 billet aluminum, these new Holley throttle bodies are designed to use the stock TPS and IAC to simplify installation. Some throttle bodies are even anodized clear, blue or red for good looks. They also include all the necessary vacuum ports and linkage to facilitate installation. Don't get left in the dust. New Holley high-flow throttle bodies are the ticket to ride.
NOTE: Some manifold machining may be required to correctly port-match the throttle body to the intake.
|
OUR Price:
|
|
|
|
|
Holley Throttle Body 105mm
Does your engine seem like it's out of breath? You can increase engine breathing with a Holley high-air-flow throttle body! Fully CNC machined from 6061 billet aluminum, these new Holley throttle bodies are designed to use the stock TPS and IAC to simplify installation. Some throttle bodies are even anodized clear, blue or red for good looks. They also include all the necessary vacuum ports and linkage to facilitate installation. Don't get left in the dust. New Holley high-flow throttle bodies are the ticket to ride.
NOTE: Some manifold machining may be required to correctly port-match the throttle body to the intake.
|
OUR Price:
|
|
|
NOS Low Volume EFI Fuel Pump
| This is the same pump used in our motorcycle and other "Power Sports" kits. It is a high flowing, low pressure pump that will support up to 200 horsepower. It has a 5/16" inlet/outlet, 12 volt/5 amp rated. Flow rate: 18 gph at 4.0 psi, 5.5 psi maximum. |
|
OUR Price:
|
|
|
|
|
SX High Pressure EFI Fuel Pump - engines up to 1300hp
The SX Performance™ In-Line Electric Fuel Pump is designed exclusively for high horsepower carbureted and fuel injected engines. Our high pressure fuel pump design moves a higher volume of fuel at a much greater velocity than our competitors' pumps. Now you can have the volume of fuel you need, where it's needed, when it's needed.
Make no mistake about it, SX Performance™ has created the most reliable fuel pump in the world today that handles high pressure/high volume fuel systems. So no matter what you're running, our pump alone lets you switch between carbureted and fuel injected systems simply by changing the regulator. Calibrated for all carbureted engines up to 1,300 HP and supports fuel injected engines up to 700 HP. Alcohol applications up to 650 HP for carbureted engines and 350 HP for fuel injected engines.
|
OUR Price:
|
|
Previous Page 1 [2] 3 Next Page
|
|
|
.jpg){kind=small}
