|
|
|
|
|
 |
|
|
AI Alloy Universal Surge Tank
Aftermarket Industries is a dynamic new Australian automotive design firm focused on producing some of most innovative performance parts available on the aftermarket scene today. Their latest offering is the all new single/dual surge tank which addresses many of the restrictions of most surge tanks in the market. It’s compact, built to the highest standards and most importantly it allows the use of 1 or 2 fuel pumps. Available for $169 shipped Australia-wide.
tank fuel capacity is 2.5L (dimensions are 130mm x 130mm x 150mm)o:p>
2mm thick aluminium
CNC machined 6061 Aerospace grade aluminium fittings
|
OUR Price:
|
|
 |
|
Alloy External Fuel Pump Bracket
A must have when using an external EFI Fuel Pump. These brackets come in 5 colours. Red, Blue, Purple, Gold and Silver. There is also two different fuel pump diameters which require a differnt rubber, the smaller VL style pump and the larger Motorsport pump.
Specify the fuel pump size and colour you want in the comments box when ordering.
|
OUR Price:
|
|
|
910 External Bosch 450hp fuel pump
This pump is rated at approx 450hp . It is a Bosch K-jetronic pump and will reliably pump at higher than normal pressures. It has a slightly unusual 13.5mm inlet that is just a little bigger than the normal 1/2 inch inlets of most external pumps. It has a threaded outlet like the Bosch motorsport pump and represents great value for money, we have been involved with cars making near 900hp that run just two of these pumps and still have good fuel return to the tank indicating they adequately feed near 450hp ea.
|
OUR Price:
|
|
|
Walbro 500hp in tank Fuel Pump
This Walbro in tank pump is a cost effective alternative for your Import project. The horsepower range is 450-500hp with an inlet diameter of 20mm and an outlet diameter of 8mm. The body diameter is 38mm x 135mm. The unit flows 2.8Litres/minute.
|
OUR Price:
|
|
|
Bosch 040 In Tank 600hp fuel pump
This pump is a Bosch K-Jetronic pump which is capable of pumping efficiently at high fuel pressures and suits high boost , high flow applications. It has a built in strainer on the base of the pump and can usually be adapted to suit most in-tank applications. It is commonly called an Audi Motorsport pump by people in the trade. It has similar physical dimensions to the external Bosch motorsport pumps but is a little shorter.This unit is the In-Tank version of the Bosch 044 Motorsport Pump.
|
OUR Price:
|
|
|
Bosch 044 660hp fuel pump
This Bosch 660hp pump is commonly called the "044" Bosch Motorsport fuel pump. This is a K-Jetronic style pump and doesnt mind pumping at much higher than normal fuel pressures. Approx 270L per hour flow rate at 3 bar fuel pressure. More methanol tolerant than most other EFI pumps.
|
OUR Price:
|
|
|
Alloy Universal Surge Tank
This polished aluminium universal surge tank has base mounting points, all outlets have ¼ BSP fittings, approx 1.5litre capacity. Offset entry on top fittings provides proper "SWIRL" effect in the tank to separate any air in the fuel . The air sits in the centre of the tank and passes out the return line to the mail fuel tank at the top. Available with -AN fittings by request, just E-mail us.
|
OUR Price:
|
|
|
SARD Fuel Pressure Regulator On Special!!! RRP $275
These SARD regulators would have to be one of the best units on the market in rising rate regulators! They are a compact billet aluminium design that provides rock solid pressure at whatever setting you give it, within the scope of the pump.
|
OUR Price:
|
|
[1] 2 3 Next Page
|
|
|
.jpg){kind=small}
